$107,000 Bid Approved for Mold Cleanup at Dublin City Hall

  • -

$107,000 Bid Approved for Mold Cleanup at Dublin City Hall


The Dublin City Council has approved a bid of $107,000 to clean and sterilize the mold-infested and storm-damaged city hall building.

The building was severely damaged by the water, wind and hail during spring’s devastating storms. As temperatures increased, mold infested the building, making it unusable.

During cleanup, the city operations will be temporarily shifted to the old Dublin ISD administration building located at 420 N. Camden Street, Dublin, Texas.


  • 0

Mold-Infested West Lafayette City Hall Building to be Demolished this Year

After remaining vacant for more than a year, the mold-infested West Lafayette city Hall building, Indiana, will be demolished this year.

Last spring, an engineering report confirmed a failing foundation as well as the presence of mold in the building due to damaged water pipes. The offices were then moved to the police station and Morton Community Center.

According to West Lafayette Mayor John Dennis (R), the building will be demolished in 2015, however, it is not decided yet if the city will re-construct the building or sell the land. “We want to make sure what we do isn’t just going to be the right fit for 2015, but for the future…As we all know working with technology — you can be anywhere and conduct meetings, you can be anywhere and have connectivity with the citizens you serve. We want to make sure if we choose to build a facility or choose to do something more creative it’s going to be what our community wants,” he said.


  • 0

West Lafayette’s City Hall Faces Serious Mold Problem

The mold problem in the vacated City Hall of the West Lafayette, Tippecanoe County, Indiana has been found to be more serious than anticipated.

Mold spores were first detected in January this year, after which, the hall was completely vacated by the end of February.

According to Mayor John Dennis, the mold remediation crew has discovered that two layers of drywall in the basement are contaminated with mold.

Dennis further said “Each layer they see that has more contamination, each floor they go where they see it’s a little bit more damaged than we had originally anticipated… Our expectations are being somewhat diminished about ever being able to return to that facility.”


  • Sea Otter: Syncros takes XC seriously with one-piece wheels
    The rims, spokes, and hub flanges are all molded as one piece in an eight-section mold (early mold iterations had 34 pieces, indicative of the complexity required in creating such a wheel). The hub shell is then inserted between the flanges, but not before the flanges are pulled aside up to 2.5mm.
  • NPE: Yizumi-HPM to launch three new series of injection molding machines at NPE
    Yizumi-HPM Corp., a unit of China's Yizumi Group and a leading manufacturer of high-quality hybrid injection molding machinery from 60 to 3500-tons clamping force, will announce the launch of three new series of injection molding machines at NPE 2018 May 7-11 at the Orange County Convention ...
  • Vail Nature Center building, which dates to the 1940s, may be beyond repair
    But, Oppenheimer said, much of that mold may be coming from three exhibits in the building: an old sign, a beaver dam exhibit and a composting exhibit. A composting ... Those exhibits will be removed and the building will be aired out and cleaned to determine if the mold is limited to those exhibits.
  • Spaghetti fundraiser to support couple
    Friends of longtime Gardnerville Ranchos residents Ken and Joy Carr have organized a spaghetti and salad feed fundraiser for the couple on May 4. Proceeds from the event will help the Carrs eradicate a mold infestation from their current home. Ken Carr received a heart transplant in August 2017 and ...
  • What do you call a burst bathroom pipe and four flooded floors? A good excuse to redesign this ...
    Because the flooding occurred over the course of four days, mold was an issue, and much of the furnishings had been destroyed. But with the help of designer Nancy Kautz of Nancy Kautz Interiors; contractor Andrew Koscielniak and his company, A to Z Remodelers of Kinnelon; and the financial support ...
  • The opportunity in Allegheny's next president
    As the early foundations of the search process for our next president manifest, I have a recommendation to present that would kick off our third century in an incredible way — we should strive to place an emphasis on finding a new President who breaks a certain mold established by our past Presidents.
  • Glass Mold Market Outlook to 2021: Emerging Trends, Growth Opportunities, Regional Analysis ...
    The Global Glass Mold Market research report is a valuable source of guidance and direction. It is helpful for established businesses, new entrants in the market as well as individuals interested in the market. The Glass Mold Market report provides important statistics on the existing state of the said ...
  • GALLERY: Tour of old Plainfield High School
    Buy Photo. [3/24] John Shishmanian/ NorwichBulletin.com. Mold on a second floor classroom wall at the former Plainfield High School Thursday. Buy Photo. [4/24] John Shishmanian/ NorwichBulletin.com. Mold on a second floor classroom wall at the former Plainfield High School Thursday. Buy Photo.
  • Anchor Glass to close plant; nearly 70 jobs will be lost
    ZANESVILLE - Nearly 70 jobs will be lost later this year after Anchor Glass Container announced it will be closing the Zanesville production plant. Anchor Glass has been a staple in the community since 1900, originally operated as Zanesville Mold on Third Street. In 1913, the plant was destroyed by ...
  • Tooling Tech Group buys Century Tool
    In a major deal in automotive plastics mold making circles, Tooling Tech Group has acquired Century Tool Group, which includes two Michigan operations: Century Tool & Gage Co. in Fenton and CTG Bel-Kur Automation in Temperance. Fort Loramie, Ohio-based Tooling Tech claims the deal makes it ...