What Are Particulates?

Aerotrak Sensor

Aerotrak Sensor

A particulate is a small discrete mass of solid or liquid matter that remains individually dispersed in gas or liquid emissions. The term particulate is usually referred to when discussing an atmospheric pollutant. Mold spores are also considered as particulate material because the airborne spores are dispersed in environmental air in varying concentrations.

Potential Consequences Of Exposure

Inhaling high levels of mold spores can cause asthma attacks in affected individuals. Exposure to high concentrations of mold spores is one cause of allergic immune response in anyone. Elderly, youthful or infirm individuals are the first to be affected, but no one is “immune.” A high concentration of any particulate like mold is a danger factor in tightly constructed new homes. Outdoor air contains environmental levels of mold; trapped inside a tightly built new home, high levels are an indication that corrective action needs to be taken.

Do You Have Particulates In Your Environment?

Don’t worry! Your Bye Bye Mold team can find particulates, detect them, and measure them, regardless of type or concentration! You don’t have to wait weeks for lab results; we can test for you immediately, for your peace of mind!

Total Culturable Mold Spore Counts Chicago 1935-1939

Total Culturable Mold Spore Counts
Chicago 1935-1939

As you can see in this chart from the 1930s (click on the chart to view a larger image), mold sampling technology has been with us a while; but we use state of the art technology which can immediately measure particulate levels in the environment. Our detection range is from 0.3 to 10 microns.

Spore Trap Testing

Bye Bye Mold also does spore trap testing which takes multiple days for analysis and final results.

Don’t risk exposure to toxic contaminants. If you suspect that you have toxic contaminants in your house, give Bye Bye Mold a call 24/7 at 800.686.1992.

Click HERE to request a particulate consultation.

  • “Some of the cells have no electric,” Former inmate describes conditions of Oklahoma County Jail
    He also says the building is infested with mold. News 4 went to the jail to figure out what's going on. The sheriff's office says it's working with a budget of $34 million — which is very small for an operation of its size. “Since Sheriff Taylor has taken over, we've done a lot of […]
  • Dealing With Toxic Mold and Water Damage in Your Condo
    Since Florida is in a tropical climate, the danger of moisture and its second-cousin, mold, is never too far away. Many condo owners in Florida have suffered some damage due to toxic mold and water intrusion from the common condominium elements like the roof and plumbing as well as damage from ...
  • Global In-Mold Labels Market Share 2018 Constantia Flexibles Group, WS Packaging Group ...
    The pervasive study conducted on “Global In-Mold Labels Market” research report demonstrates vital parameters of In-Mold Labels industry followed by marketing strategies to get promoted from the current position and contend with floating market values and dynamics. It covers In-Mold Labels market ...
  • McLean Restaurant Inspections: Moldy Ice Dispenser
    Here are the most recent inspections in McLean. One of these violations was mold on an ice dispenser. By Emily Leayman, Patch Staff | Mar ... restaurants that passed with no violations. Among these was mold found on an ice dispenser at Pulcinella Italian Host. This was corrected during the inspection.
  • Read This Before You Use That Makeup Tester
    As if that wasn't alarming enough, the study found that 28 percent of the testers at cosmetics counters contained mold spores. While most of the cosmetics contain alcohol and preservatives, these ingredients simply weren't enough to keep the bacteria and mold away. Representatives from the Canadian ...
  • Proto Labs expanding for more CNC machining and injection molding
    The project also will create more space for injection molding and mold making. The company bought an existing building in Brooklyn Park and is renovating and expanding it, said Rob Bodor, vice president and general manager for the Americas, in a phone interview. In addition to upgrading electrical, ...
  • Leigh Whannell reveals how Upgrade broke Blumhouse's horror mold
    Over the past 15 years, Leigh Whannell has become a major voice in 21st-century horror. First, he wrote the script that kicked off the wildly successful Saw franchise, which gave rise to the controversial "torture porn" subgenre. After penning two Saw sequels, the Aussie scribe re-teamed with director ...
  • Glass Mold Market Analysis – 2018 | Growth – 2023
    Glass Mold Industry provides a comprehensive understanding related to glass mold market over a forecast period of five years for vital regions including Asia-Pacific, North America, Latin America, Europe, The Middle East and Africa. It contributes clear perceptive of revenue generated per region and ...
  • Alabama teacher, state employee pay raise bills signed into law
    I am proud to have proposed the first raise for state employees to pass in close to a decade and I appreciate the work of the legislature in approving the pay increase as well as a one-time bonus for retired state employees,” Ivey said. “Our teachers mold our children and thus our teachers mold our […]
  • US Debut of Versatile Injection Stretch-Blow Machine
    At NPE2018, Kiefel Technologies is showing for the first time in the U.S. the Blowliner single-stage ISBM machine from its daughter company Mould & Matic Solutions. Major advantages of this machine are said to be its compactness and its versatility. It can process PET, PP, and HDPE; it can also be ...